Advertisement
Connect to the active speaker
AUX input port
Volume increase
Page 4
Operational guide
Power on
Connect the power adapter to the speaker and then connect to the wall socket.
The indicator light on the front panel is now lit, the system is on. Press & hold the
approximately 3 seconds to put the system into standby mode. Press the
AUX input
Connect the AUX input cable to your PC sound card, MP3 player or external audio source using the
3.5mm to 3.5mm audio connecting cable.
Play the selected audio on the connected device.
Adjust the volume to the desired level.
Set your device (mobile phone, tablet device, MP3/MP4 player etc.,) to search and select "EDIFIER Exclaim BT".
Pair your device with "EDIFIER Exclaim BT".
Play the audio on your device and adjust the volume to a desired level.
Note: 1.
Bluetooth connectivity and compatibility may be different between different source devices, depending on
the software versions of source devices.
2. To enjoy the full Bluetooth functions of this product, please ensure your mobile device has A2DP profile.
3. PIN code for connection is "0000" if needed.
Page 5
Specifications
Power output:
Signal to noise ratio:
Frequency response:
Connect to the passive speaker
Connect to the power adapter
Volume decrease
RMS 8W × 2 + 10W × 2 (DRC on)
≥85dBA
56Hz~17KHz (±6dB)
Standby/ON
button for
button to turn the system back on.
Advertisement
