Supply elbow, shower mount hand shower, valve trim, rough-in body, 3-port, three and six function diverter rough-in, 3-port, three and six function diverter trim (54 pages)
Body spray, wall elbow with gasket, shower mount hand shower, 3-port,three and six function diverter trim, rough-in body, 3-port, three and six function diverter rough-in, (58 pages)
Single handle centerset bathroom faucets (8 pages)
Summary of Contents for Delta 540-DST Series
Page 1
• To READ ALL the instructions completely before beginning. • To READ ALL warnings, care, and maintenance information. Para instalación fácil de su llave Delta usted necesitará: • LEER TODAS las instrucciones completamente antes de empezar. • LEER TODOS los avisos, cuidados, e información de mantenimiento.
Delta Faucet Company recommends using a professional plumber for all installation & repair. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use & service. Replacement parts may be obtained by calling 1-800-345-DELTA (in the U.S.
Page 3
Delta is not responsible for tubing that is cut too short or cut in a way that will not allow for a leak-free joint.
Page 4
Custom Fit Connections - Plastic Sleeve Installation Instructions Conexiones Especiales - Instructions d’installations de le manchon en plastique Spéciaux Branchement - Instrucciones para la Instalación del la Manga Plástica Correct method Método Correcto Bonne méthode 1. Identify desired length of tube (1). Leave 1" - 2" of extra length to allow for easier installation and cut tube.
Page 5
Pop-Up Installation Remove stopper (1) and flange (2). Screw nut (1) all the way down. Push washer (2) and gasket (3) down. Remove tailpiece (1) from body (2), add Teflon® tape (3), replace tailpiece. Desagüe Automático Quite el tapón (1) y el reborde (2). Atornille la tuerca (1) completamente hasta abajo.
Page 6
Remove pivot nut (1). Install horizontal rod (2) and stopper (3) as removable (4) or non-removable (5). Hand tighten pivot nut (1). Attach horizontal rod (1) to strap (2) using clip (3). Install lift rod (4), tighten screw (5). Connect assembly to drain (6). Quite la tuerca del pivote (1).
Page 7
Setting The Handle Limit Stop (Optional) This faucet includes an integrated handle limit stop that has two positions. Position 1, to the left, allows full handle motion (the full range between “all cold” to “all hot”). The faucet is set in position 1 in the factory. Position 2, to the right, allows half of the normal handle motion (“all cold”...
RP17446 Button Botón Bouton Screw RP52221 Tornillo Adapter & Screw Adaptador y Tornillo Adaptateur et Vis RP53429 Adapters 3/8"-24 UNEF to 1/2"-20 UN & 3/8"-24 UNEF to 1/2"-14 NPSM RP52220 Adaptadors Handle w/Button & Screw 3/8”-24 UNEF to 1/2”-20 UN & Manija con Botón y Tornillo 3/8”-24 UNEF to 1/2”-14 NPSM Manette avec Vis et Bouton...