Advertisement
U P
®
C
ASME A112.18.1 / CSA B125.1
Models/Modelos/Modèles
467-DST, 470-DST, 470-WE-DST,
472-DST, 473-DST & 473-SD-DST
Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
WARNING: THIS FAUCET IS NOT TO BE USED WITH PORTABLE
DISHWASHERS! / ADVERTENCIA: ¡SESTA LLAVE NO SE DEBE UTILIZAR
CON MAQUINAS LAVAPLATOS PORTATILES! / AVERTISSEMENT: ON NE
DOIT PAS BRANCHER UN LAVE-VAISSELE PORTATIF SUR CE ROBINET!
MEETS OR EXCEEDS — ASME A112.18.1 / CSA B125.1
ALCANZA O EXCEDE LAS SIGIENTES NORMAS —
ASME A112.18.1 / CSA B125.1
LE ROBINET EST CONFORME OU SUPèRIEUR AUX EXIGENCES DES
NORMES SUIVANTES: ASME A112.18.1 / CSA B125.1
For easy installation of your Delta
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
Para instalación fácil de su llave Delta
usted necesitará:
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
Pour installer votre robinet Delta
facilement, vous devez:
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien.
54298
®
SINGLE HANDLE PULLOUT PALO
AND SAXONY
KITCHEN FAUCETS
®
LLAVES EXTRAÍBLES DE AGUA PARA COCINAS
PALO
, SIGNATURE
®
ROBINETS À UNE MANETTE À BEC-DOUCHETTE
RÉTRACTABLE SIGNATURE
ÉVIERS DE CUISINE
You may need/Usted puede necesitar/
Articles dont vous pouvez avoir besoin:
54298
1
, SIGNATURE
®
Y SAXONY
®
®
ET SAXONY
®
T E FLO N
1/8"
®
POUR
®
2/23/09
Rev. C
Advertisement
Table of Contents
Related Manuals for Delta 467-DST Series
Summary of Contents for Delta 467-DST Series
- Page 1 • To READ ALL the instructions completely before beginning. • To READ ALL warnings, care, and maintenance information. Para instalación fácil de su llave Delta usted necesitará: • LEER TODAS las instrucciones completamente antes de empezar. • LEER TODOS los avisos, cuidados, e información de mantenimiento.
- Page 2 Delta Faucet Company recommends using a professional plumber for all installation & repair. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use & service. Replacement parts may be obtained by calling 1-800-345-DELTA (in the U.S.
-
Page 3: Faucet Installation
Faucet Installation DECK MOUNT STYLE Place baseplate shanks (1) through mounting holes in deck. Option: If sink is uneven, use silicone sealant under the baseplate. Place escutcheon (1) over baseplate. Insert faucet (2) down into escutcheon assembly. Instalación de la Llave de Agua INSTALACIÓN CON UNA CHAPA Coloque las espigas de la chapa de soporte (1) a través de los orificios en la... -
Page 4: Hose Installation
Hose Installation Pass hose (1) through faucet (2). Thread wand assembly (3) onto hose (1) to prevent hose from becoming lodged in faucet when installing weight (4). Slide hose weight (4) over other end of hose. Instalación de la Manguera Pase la manguera (1) por la llave de agua (2). - Page 5 Delta is not responsible for tubing that is cut too short or cut in a way that will not allow for a leak-free joint.
-
Page 6: Plastic Sleeve Installation
Correct method Método Correcto Bonne méthode Custom Fit Connections - Plastic Sleeve Installation Instructions 1. Identify desired length of tube (1). Leave 1" - 2" of extra length to allow for easier installation and cut tube. Ensure cut is straight and burr free. 2. - Page 7 For Models with Soap Dispenser For models with soap dispenser. Remove nut (1). Insert body assembly (2) through selected hole in sink. Secure body assembly to sink with nut (1). From under the sink screw the bottle (3) onto the body assembly shank. Insert pump (4) down into the body assembly, then attach head assembly (5) to pump.
-
Page 8: Setting The Handle Limit Stop
Setting The Handle Limit Stop (Optional) This faucet includes an integrated handle limit stop that has two positions. Position 1, to the left, allows full handle motion (the full range between “all cold” to “all hot”). The faucet is set in position 1 in the factory. Position 2, to the right, allows half of the normal handle motion (“all cold”... -
Page 9: Cleaning And Care
Maintenance If faucet leaks from under handle: Remove handle and unthread trim cap (1). Using a wrench, ensure bonnet nut (2) is tight. If leak persists–SHUT OFF WATER SUPPLIES. Replace valve cartridge (3). When reinstalling parts, make sure bonnet nut (2) is tightened securely with a wrench.* If faucet leaks from spout outlet–SHUT OFF WATER SUPPLIES. - Page 10 467-DST Models / Modelos / Modèles RP44792 Set Screw Tornillo de Presión Vis de calage RP51499▲ 1.5 gpm Wand Assembly RP32529▲ Ensamble de la Aerator Cabeza del Rociador Aireador Bec-douchette Aèrateur RP44643▲ 2.2 gpm Wand Assembly Ensamble de la RP32529▲...
- Page 11 470-DST, 470-WE-DST & 472-DST Models / Modelos / Modèles RP152 Set Screw Tornillo de Presión Vis de calage RP28906 Button / Botón / Bouton RP60732▲ 1.5 gpm Wand Assembly Ensamble de la Cabeza del Rociador Bec-douchette RP32542▲ 2.2 gpm Wand Assembly Ensamble de la Cabeza del Rociador Bec-douchette...
- Page 12 473-DST & 473-SD-DST Models / Modelos / Modèles RP152 Set Screw Tornillo de Presión Vis de calage RP28906 Button / Botón / Bouton RP60733▲ 1.5 gpm RP32529▲ Wand Assembly Ensamble de la Aerator Cabeza del Rociador Aireador Bec-douchette Aèrateur RP38643▲ 2.2 gpm Wand Assembly Ensamble de la...