Dell 4610X User Manual page 52

In order to use your projector wirelessly, you need to complete the steps below:
1
Install the wireless antenna. See "Installing the Antenna" on page 10.
2
Enable wireless connection on the projector. See "WIRELESS AND
NETWORK" on page 43.
3 Set the Input Select menu to Wireless / Network. See "INPUT SELECT" on
page 35. The Wireless Guide Screen shown below appears:.
4
Take note of the LOGIN CODE, NETWORK NAME (SSID), and IP
ADDRESS. You will need these information to login later.
5 Connect your computer to the 4610X WIRELESS PLUS network.
52 Using Your Projector