Dell 4610X User Manual page 30

5
Aspect Ratio
6
Page up
7
Mute
8
Page down
9 Video mode
10 Blank screen
11 Up
12 Left
13 Menu
14 Volume up
15 Laser
16 Volume down
17 Keystone adjustment Press to adjust image distortion caused by tilting
18 Source
30 Using Your Projector
Press to change aspect ratio of a displayed image.
Press to move to previous page.
NOTE:
The USB cable must be connected if
you want to use the Page Up feature.
Press to mute or un-mute the projector speaker.
Press to move to next page.
NOTE:
The USB cable must be connected if
you want to use the Page Down feature.
The projector has preset configurations that are
optimized for displaying data (presentation
slides) or video (movies, games, etc.).
Press the Video Mode button to toggle between
Presentation mode, Bright mode, Movie mode,
sRGB, or Custom mode.
Pressing the Video Mode button once will show
the current display mode. Pressing the Video
Mode button again will switch between modes.
Press to hide/show the image.
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to activate the OSD.
Press to increase the volume.
Point the remote control at the screen, press and
hold the laser button to activate the laser light.
CAUTION:
when it is active. Avoid directing the laser
light on your eyes.
Press to decrease the volume.
the projector (+40/-35 degrees).
Press to switch between Analog RGB, Composite,
Component (YPbPr, via VGA), HDMI, and S-
video sources.
Do not look at the laser point