Alienware Command Center; Working With Raid - Dell Alienware 0JYTRGA00 Owner's Manual

Alienware Command Center

The Alienware ® Command Center gives you access to Alienware' s exclusive
software and is a continuously upgradable control panel. As Alienware releases
new programs, they download directly into the Command Center allowing you to
build a library of system management, optimization, and customization tools.
To access the Command Center, click Start
Command Center→ Command Center.
AlienFX
AlienFX lets you customize the lighting behavior on your computer. You can
®
assign lighting behaviors to events like receiving new e-mail, computer going
into the sleep mode, and opening a new application.
AlienFusion
AlienFusion gives you access to your Alienware computer' s power management
controls to help increase energy efficiency.
Thermal Controls
If you have vents present on top of your computer, use thermal controls to control
the thermal and venting capabilities of your computer by changing the fan speed
and behavior of the vents.
24 CHAPTER 4: USING YOUR DESKTOP
→ All Programs→ Alienware→

Working With RAID

A redundant array of independent disks (RAID) is a disk storage configuration
that increases performance or data redundancy. There are four basic RAID levels
discussed in this section.
• RAID level 0 is recommended for higher performance (faster throughput).
• RAID level 1 is recommended for users who need a high level of data
integrity.
• RAID level 5 is recommended for higher performance and fault tolerance.
• RAID level 10 is recommended for higher performance and data integrity.
NOTE: RAID requires multiple hard drives. The number of hard drives
required varies depending on the RAID configuration.