TP-Link M7350 Quick Installation Manual page 2

Charging Your M7350
Method 1
Via the Power Adapter
5V/1A
* The M7350 has been fully charged when the lighting symbol (
Power Saving Mode
For power saving, you may encounter the two situations below:
1. The screen will turn off automatically after 15 seconds.
2. The Wi-Fi connection will turn off automatically if no Wi-Fi devices connect to the M7350 for 10 minutes.
You can simply tap the button or MENU button to recover.
Please refer to the User Guide to change the Wi-Fi Range and Wi-Fi Auto-disable Time
for power saving.
Screen Display
R
4G
2 100%
1
500 KB/S 560MB / 2.00GB
Restoring to Factory Defaults
Method 1
On your PC, log into the web-management page, go to "Advanced->Device->Factory Defaults"
Method 2
Press and hold the Reset button for about 5 seconds until the screen appears "Power off".
*Once the M7350 is restored, all the current configurations will be lost and you may need to reconfigure it.
Important Safety Information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble or modify the device.
Do not use damaged power adapter or USB cables to charge the device.
Do not use any chargers other than those recommended.
Do not use the device where wireless devices are not allowed.
*
Please follow the above instructions when operating the device. We cannot guarantee that no
accidents or damage will take place due to improper use of the device. Please use with care and
operate at your own risk.
(Recommend)
) of battery icon disappeared.
Signal Strength
4G/3G/2G Network Type and Internet Connection
R
Data Roaming
Hold
5 S
Method 2
Via Computer USB
Messages
1
Wi-Fi Status and User Numbers
2
Battery Meter
100%
and click Restore
,
Power off
For More Information
For more information, please visit our website:
Power Saving
Download Speed
500 KB/S
Cumulative Traffic Usage
560MB / 2.00GB
/ Total (Monthly) Allowance
that you have set
.
http://www.tp-link.com