AT&T DAL75011 Quick Start Manual page 25

Smart call blocker
Set Smart call blocker via voice guide
After installing your phone or power resume after outage, the voice guide will
provide you a quick and easy to set Date and Time, to configure Smart call blocker,
and to set up Answering system.
After the date and time setting is done or skipped, the base will prompt if you want
to set Smart call blocker. Press SELECT to start the Smart call blocker setup via
voice guide.
This feature is an easy and alternative way for you to do the basic setup of Smart
call blocker. You can follow the voice guide to set your telephone system to allow
or to screen all incoming home calls, or to screen home calls that do not display a
phone number.
You hear a voice prompt "Hello! This voice guide will assist you with the basic setup of
Smart call blocker..."
Set up your Smart call blocker feature by inputting the designated numbers, as
instructed in the voice guide.
To skip the set up, press
f
Press 1 if you want to screen home calls with telephone numbers that are not
f
saved in your phonebook or star name list; or
Press 2 if you do not want to screen calls, and want to allow all incoming calls to
f
get through.
Note:
To restart the voice guide:
CALL BLOCK ->
Ì
Quick setup using the Set profile option
You can perform the following steps to quickly set up Smart call blocker, as
described in the following five scenarios.
1. Press CALL BLOCK on the handset.
/ to choose Set profile ->SELECT.
2.
/
3. to select from the following five options ->SELECT.
Screen unknown
f
Screen robot
f
Allow unknown
f
UnknownToAns.S
f
Block unknown
f
OFF/CANCEL.
-> Voice guide -> SELECT.
/
23
Set profile
ECO
Screen unknown
ECO