AT&T DAL75011 Quick Start Manual page 14

Initial basic settings
Basic answering system setup via voice guide
You can follow the voice guide to record your own announcement, set the number
of rings and set the message alert tone.
Using a cordless handset:
1. Press MENU ->
/ -> Voice guide -> SELECT.
2.
3. Set up the answering system by inputting the designated numbers, as
instructed.
Add a Bluetooth
Note: Your DAL75011/DAL75021/DAL75111/DAL75121/DAL75211/DAL75221/DAL75311/
DAL75321/DAL75411/DAL75421 is compatible with Bluetooth version 2.0 or above devices.
To use a Bluetooth enabled cellular phone or headset with your telephone, you
must first pair and connect your Bluetooth cellular phone or headset with the
telephone base.
Bluetooth wireless technology operates within a short range (up to 30 feet). Keep
the connected device within 15 feet of the telephone base for optimal performance.
To pair and connect a cell phone using the telephone base:
1. Press and hold CELL 1 or CELL 2 for about four seconds until the CELL 1 or
CELL 2 light flashes.
2. Place the cell phone next to the telephone base. Turn on the Bluetooth feature
of your cell phone and search for or add new advices. Once your cell phone finds
your AT&T phone (AT&T DECT 6.0), press the appropriate key on your cell phone
to continue the pairing process.
To pair and connect a headset using a cordless handset:
MENU ->
1. /
-> Add BT headset -> SELECT.
2. /
3. Set your headset to discoverable mode -> Press
/ -> Answering sys -> SELECT.
cell phone/headset
®
-> Bluetooth -> SELECT.
SELECT.
12