D-Link DES-7200 User Manual page 95

93 91 Network Storage
Storage area Network (SaN) arrays
Model
Drive Bay
Drive Interface Support
System Memory
Cache Memory
Battery Backup for Cache
Bandwidth
Storage Capacity 1
Storage
Supported NICs, ISCI
Feature
Accelerators and iSCSI HBAs
Supported operating Systems
iSCSI Network Interface
Host Interface
Connections
CHAP Authentication
access Control of Management
iSCSI Network
iSCSI/TCP/IP Full Hardware
Interface
offload
Jumbo Frame
IEEE 802.3ad Link Aggregation
IEEE 802.1Q Virtual LAN (VLAN)
raID Controller
raID Support
Volumes
target Nodes
Online Capacity Expansion
Hot-Swappable Drives
Volume & raID Instant Volume access
Free Space Defragmentation
Auto-Detection Failed Drive
auto-rebuild Spare Drive
raID Level Migration
Drive roaming in Power off
Micro rebuilds
embedded IP-based
Storage
Management gUI
Management
Firmware Field Upgradable
Supply type
Input Voltage
Input Frequency
Input Current (Maximum)
Power
Power Factor Correction
Power Consumption (Full
Configuration)
Thermal (Full Configuration)
operating temperature
Storage temperature
environmental
Operating Humidity
Storage Humidity
Form Factor
Physical Dimension (W x D x H)
Weight (Full Configuration)
emission
Certification
Safety
1 Support for higher capacity drives as they are introduced
Please refer to D-Link website for latest support information
2
Storage area Network (SaN) arrays
DSN-1100-10
5
256MB to 512MB
(256MB Standard)
256MB to 1GB
(256MB Standard)
Up to 425MB/s
5TB with 1TB HDDs
Intel ® Pro 1000Mt & Xt (1gbe)
alacritech SES2104ET (SNP 9.1.0.1092 & 7.3.1.0)
®
alacritech SES2102ET (SNP 9.1.0.1092 & 7.3.1.0)
2 ®
Qlogic 4010C, 4052C & 4062C
®
windows Vista
Windows Server 2003
Windows Server 2003
windows XP Pro
2
Windows 2000 Advanced Server
SuSe ® Enterprise Server 10.2 32-bit (x86); SuSE
Four 1GbE Copper Ports
Up to Four LAGs
Up to Four 1-to-1
Mapping between IP
Subnet and VLaN
1,024 Virtual Volumes (256 Accessible per Initiator)
Create, Mange, Expand and Monitor Storage Pool, Volumes and RAID
1U 200-Watt Redundant 2U 400-Watt
100~240 VAC
50~60Hz
4A 8A@100VAC; 4A@240VAC
112-Watt
815 BTU/hour
tower 2U, 19-inch Rack-Mount
167 x 273 x 259 mm
4.0 kg
DSN-2100-10 DSN-3200-10
8
Sata-II
256MB to 512MB
(512MB Standard)
256MB to 4GB
(512MB Standard)
Standard (Approximately 72 hours on Full Charge)
Up to 850MB/s
8TB with 1TB HDDs
Myricom 10G-PCIE-8A-C+E (10GbE)
Neterion
alacritech
alacritech
® 32-bit & x64 (Ultimate & Enterprise) with Built-in iSCSI Initiator
® 32-bit & x64 SP1 (Standard & Enterprise) with v2.07 iSCSI Initiator
® R2 32-bit & x64 SP1 (Standard & Enterprise) with v2.07 iSCSI Initiator
® 32-bit & x64 with v2.07 iSCSI Initiator
® with v1.6 & v2.01 iSCSI Initiator
Red Hat ® 7.3; Red Hat ® Enterprise AS Update 5
® Professional 9.3 32-bit & x64
Mac OS X (10.4 & 10.5)
eight 1gbe Copper Ports
iSCSI Draft 20 Compliant Initiator
1,024 Hosts
Yes
Yes
Yes
Yes
Up to eight Lags
Up to eight 1-to-1 Mapping between IP Subnet and VLaN
Single-Integrated in aSIC
RAID Levels 0, 1, 1+0 and 5
1,024
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes (Configured Drives are Not Bay-Specific)
Yes
Yes
47~63Hz
95%@110V, Full Load
360-Watt
1,260 BTU/hour
0°C t0 40°C
-20°C t0 70°C
20% to 90% (Non-Condensing)
10% to 95% (Non-Condensing)
438 x 635 x 89 mm
20.4 kg
FCC Class A; CE Class A; C-Tick Class A; VCCI Class A
CSA 60950-1; UL 60950-1; IEC 60950-1; EN 60950-1
DSN-3400-10
15
Up to 1160MB/s
15TB with 1TB HDDs
Intel ® Pro 1000Mt & Xt (1gbe)
Intel ® Pro 1000 CX4 (1GbE)
Chelsio S310X-SR-XFP (10GbE)
®
Xframe® II & Xframe e (10gbe)
® ®
SES2104ET (SNP 9.1.0.1092 & 7.3.1.0)
®
SES2102ET (SNP 9.1.0.1092 & 7.3.1.0)
®
Qlogic 4010C, 4052C & 4062C
®
One 10GbE XFP
(XFP sold separately)
Not applicable
Redundant 3U 2+1 760-Watt
90~264 VAC (Auto-Switching)
20A@90VAC; 10A@264VAC
570-Watt
2,000 BTU/hour
3U, 19-inch Rack-Mount
438 x 571 x 133 mm
33 kg