Advertisement
9.
Corner Cover Installation
1. Corner cover (GM86036 qty. 4) and pan head machined
screws (M965A-06020-20 qty. 12)
Figure 15 Corner Covers
9.1
Position the corner covers (GM86036 qty. 4) as
shown in Figure 15 using 3 pan head machined
screws (M965A-06020-20) per corner cover.
TT-1604 5/16
10. Install the roofs.
1
GM87198-
1. Alternator roof (GM87234 or GM88929)
2. Engine roof (GM87228 or GM88925)
Figure 16 Roofs
10.1 Position the alternator roof (GM87234 or
GM88929) and engine roof (GM87228 or
GM88925) onto the sound enclosure as shown in
Figure 16.
Attach the alternator roof to the mounting brackets
in the top rail and secure using four wing nuts
(X-276-9). See Figure 14 for more detail.
Attach the engine roof to the mounting brackets in
the top rail and secure using three wing nuts
(X-276-9). See Figure 14 for more detail.
Note: Final tighten all hardware.
1
2
GM87198-
9
Advertisement
