Basic Operations - AOpen PV11a Series User Manual

Onscreen Display (OSD) Menus (for PV11/
PV110/DP101/FG100)

Basic operations

1 After turning on the projector, the HDMI signal source displays if an
HDMI source is connected. If not, a "NO signal" message will display.
2 Press (ENTER) or
3 Use / to select a main menu item.
4 Use / to select a sub menu item.
5 After selecting the desired item, press
a submenu.
6 Use / / /
7 To exit the OSD menu, press
repeatedly.
HDMI
Selects the HDMI source.
Software Update(USB)
You can follow below steps to update the firmware.
1
Channel
2
3
4
(Menu) and the OSD menus display.
or (ENTER) to change the settings.
(BACK) on the projector or remote control
Download the latest version from website and
copy the file to a FAT32 formatted USB drive.
Power on the projector and plug in the USB flash
drive with the latest firmware files.
Go to the "Channel" > "Software Update(USB)"
menu and press "ENTER".
The confirmation message appears. Select "Yes"
and the update process will begin.
(ENTER) to enact it or enter
23