Troubleshooting - Cuisinart Cup-O-Matic SS-1 Instruction Booklet

TROUBLESHOOTING

PROBLEM
Pod and Brew
buttons are
slow-flashing
Power button
is fast-flashing
(with beeping sound)
Brew button
is fast-flashing
(with beeping sound)
Clean button
is fast-flashing
(with beeping sound)
10
CAUSE
Boiler not primed
Water reservoir
not in place
Low water
Brew cup not in place
Too much ground
coffee
Brew cup not
removed
(when cleaning)
Brew cup partially
removed
(when cleaning)
SOLUTION
• Hold down POD and BREW buttons
simultaneously for approx. 2 seconds
to prime
• When the boiler has been primed the
unit will begin heating
• Once the unit has heated it will be in
standby mode
• Return water reservoir to unit
• Once the unit has heated, it will return
to standby
• Refill water reservoir
• Once unit has heated, it will return to
standby
• Return brew cup to unit
• Press Brew button to resume brewing
process
• Remove brew cup from unit
• Make sure brew cup contains no more
than 4 tablespoons of ground coffee
• Return brew cup to unit
• Press Brew button to resume brewing
process
• Remove brew cup from unit
• Press Clean button and the unit will
resume clean function
• Remove brew cup from unit
• Press clean button twice and the unit
will resume the clean function.