Camera Configuration - Stealth Cam PX Pro Series Instruction Manual

Camera Configuration

This camera features 3 Modes of operation (OFF |
TEST | ON) and 6 distinct Quick Set (QSET) options.
OFF – This position completely powers down the unit.
ON – This position turns the unit ON allowing it to
capture images/videos based on the operational mode
the unit is set. The unit will automatically enter Date &
Time menus on initial startup.
• While ON the unit will remember the last set operational mode.
• Pressing the UP and DOWN button cycles the available modes
respectively. (Qset1 / Qset2 / Qset3 / Qset4 / Qset5 / Qset6 / Custom)
TEST – This is the final switch setting, and is used to determine the camera's
PIR sensor coverage area. When moved to this setting the display will display
TEST. Simply walk back and forth in front of the camera, the light will illuminate
green when you have passed into the coverage area.
See table for breakdown of Quick Set modes.
Name
QSET 1
QSET 2
QSET 3
QSET 4
QSET 5
QSET 6
Type Quality
Photo Low
Photo High
Video 720P
Photo Medium
Photo Medium
Video 720P
Timeout
Detail
Delay
30 sec 3 Photos
30 sec 1 Photo
30 sec 10 sec video
5 sec 3 Photos
90 sec 2 Photos
5 sec 15 sec video
Page 8