Stealth Cam PX Pro Series Instruction Manual page 12

Time Lapse Settings
RESOLUTION: This setting will determine the
quality of each image. A higher quality will result in
better photos and take more memory space.
OPTIONS: High | Med | Low
PHOTO BURST: This setting determines how
many photos are taken each time the camera is
activated.
OPTIONS: 1 photo – 6 photos
PIR DELAY: This setting is used to determine how
long the camera will wait before reinitializing the
PIR sensor after taking a photo.
OPTIONS: 5 sec | 10 sec | 15 sec | 20 sec |
30 sec | 60 sec | 120 sec
TL STARTUP: This setting is used to determine
the start time of the time lapse.
BLUR REDUCTION: This setting is used to
determine if the camera should use the MATRIX
Blur technology to dramatically reduce the blur
effect, resulting in more clear night time infrared
shots.
OPTIONS:
STANDARD: Minimize blurring effect in
images while retaining long-range night image
capability.
ADVANCED: Enhanced blur reduction
providing a balance between brightness and
image sharpness.
TIME LAPSE (TL) DELAY: This setting will adjust
the length of time between each photo taken
during the time lapse.
OPTIONS: 5s | 10s | 15s | 20s | 30s | 1 min |
5 min | 10 min | 15 min | 30 min | 60 min
TL STOP: This setting is used to determine the
end time of the time lapse.
Page 12