John Lewis Devon 820/81602 Assembly Instructions page 3

Step by step assembly instructions
Step One
Attach Pin (E) to Pillar 1 (A).
______________________________________________________________
Step Two
Attach Chain (F) to the Pin (E) Using the nut and bolt assembly which is pre-fitted to Chain (F)
____________________________________________________________________________
Step Three
Assemble the support frame by inserting Pillar 1 (A) in to Pillar 2 (B), and then Pillar 2 (B) into the
Base (C). Ensure all holes are aligned and then secure with Bolt (H), 2x Washer (J), Spring Washer (I)
and Nut (K) as shown below.
3