Lincoln Electric INVERTEC 275S Operator's Manual page 16

Current range ribbon
The machine automatically configures the best current
value. It is also possible to adjust the current around this
value. As soon as the current remains in proper welding
current range for the application,
If the current exceed the proposer welding range, the
ribbon turned into red indicating to the user the current
selectin is not the best one.
System Options
To configure Power Source parameters, select "System
Option" icon.
English
* Only available when USB key is plugged
USB Key  Backup all settings & memories
Export from power source to memories previously saved.
USB Key  Load Only Memories
Import from USB key to power source memories
previously saved.
USB Key  Enable Data Monitoring on USB key
Activation of Data Monitoring is possible only when USB
key is plugged.
A .csv file is created on USB where average voltage,
average current, arc time and process selected.
Data monitoring remains active even if USB key is unplug
and data will be store after plugging again USB key.
Weld Mode Setup
See "Guided Setup" section.
Memories Management
Saved memories can be deleted in this section.
Voltage Reduction Device
When activated, ouput voltage no load voltage will be
reduced to 11V.
14 English