Table of Contents
Advertisement
CENTER PANEL
Auto Hold
Auto Hold temporarily maintains the vehicle at a standstill even if the brake
pedal is not depressed after the driver brings the vehicle to a complete stop
by depressing the brake pedal . Auto Hold can be turned On/Off using the
AUTO HOLD switch
A
on the center panel . Before Auto Hold will operate,
the driver's door, engine hood and liftgate must be closed and the driver's
seat belt must be fastened .
Depress the brake pedal, start the engine and then press the AUTO HOLD
switch
A
. The white Auto Hold indicator will come on indicating the system
is in standby .
The Auto Hold indicator, which is in the instrument cluster, has four states:
White: Standby – When vehicle is in Park and at a standstill, and AUTO
HOLD switch
A
turned ON, the indicator will illuminate white . While
driving the vehicle (vehicle is not at a standstill), the Auto Hold indicator
will remain white .
Green: Engaged – When coming to a complete stop by depressing the brake pedal, the Auto Hold indicator
changes from white to green .
OFF (not illuminated) – The indicator will turn OFF when the AUTO HOLD switch
or when the EPB is manually turned ON .
Yellow: Malfunction – When the indicator is illuminated yellow, there may be a system malfunction . Take
your vehicle to a local Kia dealer .
ALWAYS CHECK THE OWNER'S MANUAL FOR COMPLETE
OPERATING INFORMATION AND SAFETY WARNINGS .
A
QR CODE
Electric Parking Brake /
Auto Hold Video
Refer to the inside front cover for
more information on QR codes .
www . y outube .com/KiaFeatureVideos
A
is manually turned OFF
REMINDERS:
• To reduce the risk of an accident, do not
activate Auto Hold while driving downhill,
backing up or parking your vehicle
• Do not solely rely on the Auto Hold system to
keep the vehicle stopped . Always pay attention
to traffic and road conditions, and be prepared
to depress the brakes
See section 5 in the Owner's Manual for more
information .
45
*IF EQUIPPED
Advertisement
Table of Contents
