Table of Contents
Advertisement
15. REPLACEMENT PARTS LIST
1. RTL (Retention Time Limited)
Note:
The marking (RTL) indicates that the Retention Time is limited for
this item.
After the discontinuation of this assembly in production, the item
will continue to be available for a specific period of time. The
retention period of availability is dependent on the type of
assembly, and in accordance with the laws governing parts and
product retention.
After the end of this period, the assembly will no longer be
available.
2. Important safety notice
Components identified by
important for safety. When replacing any of these components,
use only manufacture's specified parts.
3. The S mark means the part is one of some identical parts. For that
reason, it may be different from the installed part.
4. ISO code (Example: ABS-HB) of the remarks column shows
quality of the material and a flame resisting grade about plastics.
5. RESISTORS & CAPACITORS
Unless otherwise specified;
All resistors are in ohms ( ) K=1000 , M=1000k
All capacitors are in MICRO FARADS (
*Type & Wattage of Resistor
mark have special characteristics
F) P=
29
F
Advertisement
Table of Contents
