Related Manuals for Swann AMU-II
Summary of Contents for Swann AMU-II
- Page 1 110820 / 290421 AMU-II Interface Options A-81.460.010, A-81.460.020, A-81.460.030 Installation Instruction...
- Page 2 AMU-II Interface Options Installation of the Interface Option Installation of the Interface Option WARNING Electrical shock hazard Before opening the housing, disconnect the AMU-II transmitter from the power supply. CAUTION Observe precautions for handling electrostatic discharge sensitive devices. Housing Mainboard...
- Page 3 Installation of the Interface Option To install an interface option, proceed as follows: 1 Switch power off. 2 Loosen the four screws at the back of the AMU-II transmitter and remove the backplate. 3 Pull the mainboard [B] completely out of the housing.
-
Page 4: Usb Option
AMU-II Interface Options USB Option USB Option Pushbutton L USB stick Blue LED Menu item After the USB option has been installed, the <Operation>/<Eject USB Stick> menu item becomes visible. Logger Log Interval 30 Minutes Clear Logger Eject USB Stick <Enter>... - Page 5 4 Navigate to <Installation>/<Miscellaneous>/<Set defaults>, press [Enter] and select “completely”. 5 Press [Enter], [Exit] and confirm with “yes”. The AMU-II transmitter restarts and all settings are set to factory defaults. 6 Enter the customer-specific settings according to the notes taken.
- Page 6 AMU-II Interface Options RS485 Option RS485 Option Menu items After the RS485 option has been installed, the <Interface> menu item becomes visible in the <Installation> menu. Select Modbus RTU or Profibus as protocol. After that, further settings of the selected protocol become visible.
-
Page 7: Hart Option
AMU-II Interface Options HART Option HART Option Menu items After the HART option has been installed, the following menu items become visible: <Installation>/<Signal Outputs>/<Signal Output 3>: Signal Outputs Signal Output 1 Signal Output 2 Signal Output 3 <Installation>/<Interface>/<Device Address>: Interface... - Page 8 110820 / 290421 Swan Products - Analytical Instruments for: Swan is represented worldwide by subsidiary companies and distributors and cooperates with independent representatives all over the world. For contact in- formation, please scan the QR code. Swan Analytical Instruments ∙ CH-8340 Hinwil www.swan.ch ∙...