Panic Mode; Valet Mode - Clifford RSX3.2 Owner's Manual

Clifford rsx3.2 owner's guide

Hide thumbs Also See for RSX3.2:

Table of Contents

note: The Warn Away

bypassed if the system is armed using Silent Mode. This

ensures that no chirps will be emitted by the siren in an

area you want chirp-free. The system is still fully capable

of triggering. Only the Warn Away

The remote responds with the normal arm/disarm notifications

in silent mode. (If the remote has beeps programmed On, the

remote will beep.)

➜

panic mode

If you are threatened in or near your vehicle, you can attract

attention by triggering the system with your 2-way remote. Just

press

for 3-seconds, and you will enter Panic Mode. The

siren will sound and the parking lights will flash for the

programmed siren duration. To stop Panic Mode at any time,

press

The remote responds with one flash of the Red LED upon

entering Panic Mode and two flashes of the Red LED upon

exiting Panic Mode.

➜

You can prevent your security system from automatically arming

and triggering by using Valet Mode. This is very useful when

washing the vehicle or having it serviced. In Valet Mode, the

security system will not arm, even with the 2-way remote, but all

convenience functions (door locks, trunk release, etc.) will

continue to work normally.

response to lighter impacts is

on the 2-way remote.

response is bypassed.

Table of Contents