Table of Contents
Advertisement
For details on NFS server settings, consult your system
administrator.
VTR Format Settings
The VTR format can be set with the SYSTEM MENU
from the OTHERS CHECK menu within the
MAINTENANCE menu on the VTR.
For details on the MAINTENANCE menu of the VTR, refer
to the Installation Manual supplied with the SRW-5800.
Note
All the formats described below are applicable only to
HDCAM-SR-format tape.
1
On the VTR, open the SYSTEM MENU from the
OTHERS CHECK menu.
2
Set the items in the menu according to the format that
you want to use.
For downconverting 4K/2K files to record in HD
format, set the items to the values indicated in the
columns below "Compression (HDCAM-SR) format"
header in the table below.
Compression
(HDCAM-SR) format
SYSTEM
1920 × 1080
MODE
SYSTEM
PsF or interlace
SCAN
SYSTEM
23.98, 24, 25, 29.97,
FRAME
or 30
SYSTEM
444SQ, 422, or
SIGNAL
444HQ
The formats described in the table above are the VTR
formats that the HKSR-5804 supports.
To specify the type of signal output from
the AUX OUTPUT connectors
Perform the procedure below to specify the type of SDI
signal output from the AUX OUTPUT A/B connectors.
1
2
Note
The monitor output (4:2:2 single ×2) is not guaranteed if
"3G" is selected in step 2 above and "YCbCr" is specified
as the signal in the MONITOR tag display of the web
application or as the color space in menu item "B02: NW
MON CTRL" in the VTR SETUP menu of the SRW-5800.
VTR Remote Mode Setup
Uncompression
(DATA) format
DATA
Press to light up the NETWORK 2 button on the upper
PsF
control panel of the SRW-5800.
25 or 29.97
Accessing the VTR From the Web
—
Client
Access the VTR from the web client by entering the IP
address of the VTR in the address bar of the web browser.
Note
The AUX output from the HKSR-5804 is not
guaranteed when the SRW-5800 is set to a system
format other than the ones described in the table above.
On the VTR, open the 3G/DUAL menu from the
SYSTEM MENU, and then open the AUX OUTPUT
menu from the 3G/DUAL menu.
Select the appropriate signal type.
DUAL: Dual link (conventional 1.5G dual mode)
3G: 3G output
NETWORK 2 button
9
Setting Up the System
Advertisement
Table of Contents
