Table of Contents
Advertisement
Available languages
Available languages
Handset Registration With Your ClearSounds A50
The following steps are for registration of additional handsets (model A50E):
1. Make sure the ClearSounds A50 base unit is connected into the AC outlet and phone
jack. Your ClearSounds A50 handset will show HS-1 (Handset 1) on the LCD.
2. Press and hold the
"CH" button on the handset until you get a beep and the display will read HS-2.
3. If you have more than two handsets, press the "CH" button on the handset until you
get a beep and the display reads HS-3. Release the
base.
NOTE: The
/PAGE button on the base unit should be kept pressed during the whole
procedure.
Congratulations! You can now enjoy the benefits of your ClearSounds A50/A50E
Cordless Expandable Amplified Telephone System.
Headset Operation
Your A50E handset is equipped with a 2.5mm headset jack for use with an optional acces-
sory headset for hands-free operation. If you choose to use the headset option, you must
obtain an optional accessory headset, which is compatible with the handset.
Headsets are available at most retail outlets that sell telephone equipment or contact
ClearSounds Communications at 800-965-9043 or visit www.clearsounds.com.
/PAGE button on the base unit. After 3 seconds, press the
/PAGE button from the
5
Advertisement
Table of Contents
