Table of Contents
Advertisement
10/22/2016
9.7 Turntable Motor
TOP PREVIOUS NEXT
1. Remove the motor cover by breaking off at the 8 spots indicated by the arrows.
2. Disconnect the two lead wires connected to the turntable motor
3. Remove the turntable motor by removing the two screws
Note: After breaking off the motor cover, make sure that cutoff portions are properly
trimmed off or bent inside so that no sharp edges are exposed.
Note: To secure the motor cover use a 4 x 6 screw.
file:///C:/Users/sh.dehghani/Desktop/NNA873,813_ABEUSVC_MOP0307006C2/viewing/SGML_VIEW_DATA/EU/NNA813AB/SVC/s0907000000.html#9.7
s0907000000.html
Figure 8
Removing the Turntable motor cover
Figure 9
1/2
Advertisement
Table of Contents
