INSTALLATION STEP 3
Attach the Rail to the Header Bracket
• Position the opener on the garage floor below the
header bracket. Use packing material as a protective
base. NOTE: If the door spring is in the way you'll need
help. Have someone hold the opener securely on a
temporary support to allow the rail to clear the spring.
• Position the rail bracket against the header bracket.
• Align the bracket holes and join with a clevis pin
as shown.
• Insert a ring fastener to secure.
Clevis Pin 5/16"x2-3/4"
Ring Fastener
10
Header Wall
Header
Bracket
Chain
Pulley
Bracket
Clevis Pin
5/16"x2-3/4"
Chain
Pulley
Bracket
Garage
Door
Header
Bracket
Ring
Fastener
Rail
Temporary
Support