Special Servicing Tools - Stihl MS 271 Manual

13.

Special Servicing Tools

New Special Tools
No. Description
1 Press sleeve
2 Flange
Existing Special Tools
No. Description
1 Carburetor and engine tester
- Nipple
- Hose for leakage test
2 Sealing plate
3 Installing tool
4 Locking strip
5 Screwdriver bit, T 27 x 125
6 Assembly drift
7 Setting gauge
8 Installing tool
9 Assembly tube
10 Test flange
- Sleeve
11 Combination wrench
12 Installing sleeve
13 Clamping strap for assembly
stand
14 Ignition system tester, ZAT 4
15 Ignition system tester, ZAT 3
16 Torque wrench
17 Torque wrench
106
Part No. Application
1141 893 2401 Installing oil seal
(clutch and ignition sides)
5910 855 4201 Sealing exhaust port for leakage test
Part No. Application
0000 850 1300 Testing engine and carburetor for leaks
0000 855 9200 Testing carburetor for leaks
1110 141 8600 Testing carburetor for leaks
0000 855 8106 Testing engine for leaks
0000 890 2201 Installing rope guide bushing
0000 893 5903 Blocking the crankshaft
0812 542 2104 Removing and installing spline socket
screws with electric or pneumatic
screwdrivers; tightening down screws
with torque wrench
1110 893 4700 Removing and installing piston pin
1111 890 6400 Adjusting air gap between the ignition
module and flywheel
1116 893 4800 Installing rewind spring
1117 890 0900 Attaching springs
1119 850 4201 Leakage Test
5910 893 1701 Spacer sleeves for test flange
1129 890 3401 Spark plug
1141 893 4600 Protecting the oil seal
(clutch and ignition sides)
5910 850 1650 Clamping machine to assembly stand
5910 850 4503 Testing ignition system
5910 850 4520 Testing ignition system
5910 890 0302 0.5 to 18 Nm
5910 890 0312 6 to 80 Nm
MS 271 C, MS 291 C
Rem.
Rem.
1)