Safety Instructions; What's In The Box; Setting Up And Switching On - Teac PR200DAB User Manual

Dab+/am/fm radio
Table of Contents

Advertisement

Safety Instructions

Please read these instructions carefully and retain for future reference.
WARNINGS
To prevent fire or shock hazards, do not expose this appliance to water or high heat.
• If the unit gets wet, DO NOT turn it on.
• Keep the unit away from damp or humid conditions.
• Do not place containers filled with liquid on the unit or near the unit.
• Keep the unit away from naked flame sources such as candles.
• Air vents built into the unit are for expelling hot air – do not cover or block these
vents.
• Be mindful of the power cable and other connected cables – place them so they
do not get pinched, walked on or damaged.
• Do not insert foreign objects into the unit.
How To Clean
• Clean the unit with a clean dry cloth. Do not use liquid or aerosol cleaners.
Support and Service
• Do not attempt to service this unit yourself. Please refer only to qualified service
technicians.
• For help and support with the installation/operation of the product, contact TEAC
Australia at 1300 553 315.

What's in the Box

1. Portable DAB+/AM/FM Radio unit
2. Power cable
3. User manual

Setting Up and Switching On

This radio should be placed away from heat and moisture, on a stable surface with
good air ventilation.
Connect the power cable to the radio unit, then plug the other end of the power cable
to a wall power outlet.
To switch the radio on, push the VOLUME dial to the right. You will hear a click. The
radio is now turned on.
Extend and adjust the antenna to receive radio channels. You may need to move the
radio to get the best reception.
4

Advertisement

Table of Contents
loading

Table of Contents