Heart rate sensor
Heart rate is measured when the heart rate sensor is worn on the chest.
Before wearing the heart rate sensor
Warning!!!: This product must NOT be used by those who have a pacemaker.
•
To avoid measurement errors, it is recommended to moisten the electrode pads
with water.
•
If your skin is ultra-sensitive, the electrode pad may be moistened with water and
worn over a thin undershirt.
•
Chest hair may interfere with the measurement.
Wearing the heart rate sensor
1.
Insert the HR strap hook to the hole on the heart rate sensor until it clicks.
2.
Wear the heart rate sensor with the HR strap, and adjust the length of the HR strap
to fit your chest size (under bust). Fastening the strap too tightly may cause dis-
comfort.
3.
Insert the HR strap hook to the other hole on the heart rate sensor
4.
For removal, hold near the hole on the heart rate sensor and the hook, and twist off.
Heart rate sensor
Hook
*
Ensure that the rubber part of the electrode pad is in direct contact with the body.
*
Wearing the heart rate sensor when your skin is dry or on top of your undershirt may produce
measurement errors. To avoid errors, moisten the rubber part of the electrode pad.
Heart rate sensor
HR strap
until it clicks.
Electrode pad
ENG-13
Continue