Steps
1. Slide the tabs on the rear-chassis fan into the slots on the chassis and rotate the rear-chassis fan inwards.
2. Press the rear-chassis fan against the chassis to snap the chassis fan in place.
3. Connect the rear-chassis fan cable to the system board.
4. Place the computer in an upright position.
Next steps
1. Install the
left-side
cover.
2. Follow the procedure in
Power-supply unit
Removing the power-supply unit
Prerequisites
1. Follow the procedure in
2. Remove the
left-side
About this task
The following image(s) indicate the location of the power-supply unit and provides a visual representation of the removal
procedure.
After working inside your
Before working inside your
cover.
computer.
computer.
Removing and installing components
39