Table of Contents
Advertisement
Quartz Q16/Q32 System Manual
TV Line Switching
Sometimes it is important to change the TV line in the vertical-blanking interval during which the
routing switcher makes its cuts. Any line from 6/319 to 10/323 may be selected using the three
jumper links LK6, 7, 8. The diagram on the PCB shows the positions of the links.
It is also possible on this version of the module to choose whether to permit switching on every TV
field or just on the first field of each picture. This can be important in certain editing applications.
The factory settings are line 6/319 and every field.
Serial Digital Video Routers
The items covered in this section are specific to the serial digital video routers.
Output Standards
The routers are capable of handling up to four different output standards with each output
automatically selecting the correct standard.
TV Line Switching
Sometimes it is important to change the TV line in the vertical-blanking interval during which the
routing switcher makes its cuts. Any line from 6/319 to 10/323 (PAL) may be selected using the three
jumper links LK6, 7, 8. The diagram on the PCB shows the positions of the links.
It is also possible to choose whether to permit switching on every TV field or only on the first field of
each picture. This can be important in certain editing applications.
The factory settings are line 6/319 and every field.
Analogue Audio Routers
The items covered in this section are specific to the analogue audio routers.
No user settings.
AES/EBU Digital Audio Routers
The items covered in this section are specific to the digital audio routers.
No user settings.
WinSetup
The WinSetup program is used to configure most of the routing functions, including control panel
operation. It allows such things as the number of signal levels to be defined, which routing frames
and panels are connected to the system, what the names are for the inputs and outputs.
Refer to the Router Control System Manual for further help on WinSetup, or use its comprehensive
help system that can be accessed by pressing F1 (function key F1) from any screen (dialog). The
help system can also be entered from the Help, Index menu.
18 May 2004
Issue 5.00
Page 23
Advertisement
Table of Contents
