Table Of Contents - Panasonic LUMIX DMC-FX66EB Service Manual

TABLE OF CONTENTS

1 Safety Precautions -----------------------------------------------3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure 1.)--------3
1.4. How to Discharge the Capacitor on Flash Top
P.C.B.----------------------------------------------------------4
2 Warning --------------------------------------------------------------5
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatically Sensitive (ES) Devices ----------5
2.2. Caution for AC Cord(For EB/GC/GH) -----------------6
2.3. How to Replace the Lithium Battery-------------------7
3 Service Navigation------------------------------------------------8
3.1. Introduction --------------------------------------------------8
3.2. General Description About Lead Free Solder
(PbF) ----------------------------------------------------------8
3.3. Important Notice 1:(Other than U.S.A. and
Canadian Market) ------------------------------------------8
3.4. How to Define the Model Suffix (NTSC or PAL
model)---------------------------------------------------------9
4 Specifications ---------------------------------------------------- 13
5 Location of Controls and Components------------------ 14
6 Service Mode ----------------------------------------------------- 16
6.1. Error Code Memory Function ------------------------- 16
6.2. ICS (Indication of additional Camera Settings
when picture was taken) function -------------------- 18
7 Service Fixture & Tools --------------------------------------- 20
7.1. Service Fixture and Tools ------------------------------ 20
7.2. When Replacing the Main P.C.B. -------------------- 21
7.3. Service Position ------------------------------------------ 21
8 Disassembly and Assembly Instructions --------------- 22
8.1. Disassembly Flow Chart-------------------------------- 22
8.2. P.C.B. Location ------------------------------------------- 22
8.3. Disassembly Procedure -------------------------------- 23
8.4. Disassembly Procedure for the Lens --------------- 29
8.5. Assembly Procedure for the Lens ------------------- 33
8.6. Removal of the CCD Unit ------------------------------ 37
8.7. Removal of the Focus Motor -------------------------- 37
8.8. The Application of Grease Method ------------------ 38
9 Measurements and Adjustments -------------------------- 39
9.1. Introduction ------------------------------------------------ 39
9.2. Before Disassembling the unit ------------------------ 39
9.3. Details of Electrical Adjustment----------------------- 41
9.4. After Adjustment------------------------------------------ 44
10 Maintenance ------------------------------------------------------ 45
10.1. Cleaning Lens and LCD Panel ----------------------- 45
PAGE
2
PAGE