Table of Contents
Advertisement
Adjusting Keystone Distortion
The Auto setup function (Auto keystone) automatically adjusts the keystone distortion in a
longitudinal direction. Follow the steps below if the function does not adjust the distortion
appropriately or you want to adjust the keystone distortion in a horizontal direction.
1
Press the [KEYSTONE] button.
The [Keystone adjustment] windows appears.
2
Press the POINTER buttons to adjust the focus.
You can activate the Auto keystone
function if you press the [AUTO SET]
button now.
To reduce the length of the
upper edge, press [ ].
To reduce the length of the
lower edge, press [ ].
To reduce the length of the left
edge, press [<].
To reduce the length of the
right edge, press [>].
47
Advertisement
Table of Contents
