Thermador T24UC925DS Use & Care Manual page 17

The divider between the
upper and lower drawers
feels warm.
Hi-alarm is activated (due to
high temperature inside the
appliance), HI is shown on
the display LED.
Data Rating Label
The data rating label shows the model and serial number of your appliance. It is located at the right side of the bottom
compartment.
Service Information
For handy reference, copy the information in the form below from the data rating label located at the right side of the
bottom compartment. Keep your invoice for Warranty validation.
Model Number
Serial Number
Date of Purchase
Dealer's Name
Dealer's Phone Number
Service Center's Name
Service Center's Phone Number
Normal operation, as part of the
moisture control system for the
exterior of the unit.
Appliance opened frequently.
The ventilation openings have
been covered.
A large amount of product, or warm
product was placed into the
appliance.
Excessively warm environment.
Drawers gasket is not sealing.
No action required.
Do not open the appliance unnecessarily. Press
alarm once to deactivate.
Remove obstacles at the ventilation openings
located at the base of the unit and in the
refrigerator interiors. Press alarm once to
deactivate.
Wait until the products cool off or remove the
warm products from the appliance, then press
alarm once to deactivate.
Avoid placing the unit in direct sunlight, or near a
heat source. Press alarm once to deactivate
Inspect the condition of the gasket. If damaged,
cold air can escape the cabinet and cause the
temperature to rise. Press alarm once to
deactivate.
Page | 17