Table of Contents
Advertisement
The LMD-2735MD/2435MD is intended for use in the electromagnetic environment specified below. The customer or
the user of the LMD-2735MD/2435MD should assure that it is used in such an environment.
IEC 60601
Immunity test
test level
Conducted RF
3 Yrms
150 kHz to 80 MHz
IEC 61000-4-6
outside ISM bands
6 Vrms
150 kHz to 80 MHz
in ISM bands
Radiated RF
3 V/m
IEC 61000-4-3
80 MHz to 2.7 GHz
NOTE 1:
At 80 MHz and 800 MHz, tbe higher frequemcy range applies.
NOTE 2:
These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and peopl1e.
Guidance and manufacturer's dE!claration - electromagnetic immunity
Compliance level
3 Vrms
6 Vrms
3 V/m
c
c
Electromagnetic environment - guidance
Portable and mobile RF communications equipment
sbould be used no closer to any part of the LMD-
2735MD/2435MD, including cables, tban tbe
recommended separation distance calculated from tbe
equation appliance to tbe frequency of the transmitter.
IEC 60601-1-2: 2007
d = 1.2 ✓ P 80 MHz to 800 MHz
d = 2.3 ✓ P 800 MHz to 2.5 GHz
IEC 60601-1-2: 2014
d = 2.0 ✓ P 80 MHz to 2.7 GHz
Where P is the maximum output power rating of the
transmitter in watts (W) according to tbe transmitter
manufacturer and d is tbe recommended separation
distance in meters (m).
Field strengths from fixed RF transmitters, as
determined by an electromagnetic site survey, • should
be less tban tbe compliance level in eacb frequency
range.
lnterference may occur in the vicinity of equipment
marked witb following symbol:
Recommended separation distance
b
Advertisement
Table of Contents
