Solenoid Valve Wiring - Bunn H10X Operating & Service Manual

SERVICE (cont.)
Solenoid Valve (cont.)
5. Lift out the solenoid valve.
6. Remove the two 10-32 slotted-head screws holding
the solenoid valve to its mounting bracket.
7. Securely install the new solenoid valve to its mount-
ing bracket. The direction of flow arrow must be
pointing towards the tank lid.
8. Attach the solenoid valve and mounting bracket to
the component bracket.
9. Securely fasten the water lines to and from the
solenoid valve.
10. Reconnect the wires, FIG. 10.
FIG. 10 SOLENOID VALVE WIRING
18
WHI/BLU to Electronic
Contol #1
RED to Terminal Block
RED to Electronic Control #5
10889 091599
P1779