Ricoh M 320 Setup Manual page 12

Connecting to the devices using the Open
system or Shared Key authentication
6. Enter the encryption key and ID using the number keys, and
then press the [OK] key.
Password
Key: (5 - 26)
ID: (Enter 1-4)
Shared Key
For details about checking the encryption key, see "Checking the
SSID and Encryption key".
The ID is used for identifying the encryption key. You can
register four encryption keys (ID 1 to 4).
7. Press the [OK] key.
Are you sure to connect?
(OK/Back)
8. Check the result.
Connection has succeeded:
Connect succeed!
Connection has failed:
Connect failed!
9. Press the [ ] or [ ] key to select [Quit Setup], and then the
[OK] key.
10. Press the [ ] or [ ] key to select [Yes], and then the [OK]
key.
Network Wizard
Do not auto display
Menu from next time
Yes No
11. Configuring the Wireless (Wi-Fi) settings is complete.
To use the printer driver, install the printer driver
according to the procedure on page 19 "4. Installing the
Printer Driver".
10
M0ESIC0013
ECB226
DSG355
DSG356
M0ESIC0014
Easy Setup Using the WPS Button
™ M 320FB/320F
● Make sure the Ethernet cable is not connected to the
machine.
● In Steps 7 to 9, configure each setting within two
minutes.
The following item is necessary to set up a Wireless
(Wi-Fi) connection.
● Router (access point)
1. Check that the router (access point) is working correctly.
2. Make sure the wireless LAN option is attached to the
machine and the wireless (Wi-Fi) connection is enabled.
For details, see page 6 "Attaching the wireless LAN option".
3. Press [Quick Setup].
For details about [Detailed Setup], see User's Guide.
4. Press [Change Wi-Fi Connection Mode].
5. Press [WPS].
6. Press [PBC].
7. Press [Connect].
"Please wait for 2 minutes" appears, and the machine starts to
connect in PBC method.
8. Press the WPS button on the router (access point) within
two minutes.
WPS
• For details about how to use the WPS button, refer to the manuals for
the router (access point).
ECC292
ECC293
CHV607