Endress+Hauser Proline 800 Brief Operating Instructions
With electromagnetic sensor
Hide thumbs
Also See for Proline 800:
- Brief operating instructions (40 pages) ,
- Operating instructions manual (126 pages)
Table of Contents
Advertisement
Quick Links
KA01495D/06/EN/02.22-00
71552846
2022-01-15
Products
Brief Operating Instructions
Proline 800
with electromagnetic sensor
Cellular radio (Type: DA800C-CRM02.01)
These instructions are Brief Operating Instructions; they are
not a substitute for the Operating Instructions pertaining to
the device.
Brief Operating Instructions part 2 of 2: Transmitter
Contain information about the transmitter.
Brief Operating Instructions part 1 of 2: Sensor → 3
Solutions
Services
Advertisement
Table of Contents
Related Manuals for Endress+Hauser Proline 800
Summary of Contents for Endress+Hauser Proline 800
- Page 1 Solutions Services KA01495D/06/EN/02.22-00 71552846 2022-01-15 Brief Operating Instructions Proline 800 with electromagnetic sensor Cellular radio (Type: DA800C-CRM02.01) These instructions are Brief Operating Instructions; they are not a substitute for the Operating Instructions pertaining to the device. Brief Operating Instructions part 2 of 2: Transmitter Contain information about the transmitter.
- Page 2 Proline 800 Cellular radio Order code: XXXXX-XXXXXX Ser. no.: XXXXXXXXXXXX Ext. ord. cd.: XXX.XXXX.XX Serial number www.endress.com/deviceviewer Endress+Hauser Operations App A0023555 Endress+Hauser...
- Page 3 These Brief Operating Instructions are Brief Operating Instructions Part 2: Transmitter. The "Brief Operating Instructions Part 1: Sensor" are available via: • Internet: www.endress.com/deviceviewer • Smart phone/tablet: Endress+Hauser Operations App Detailed information about the device can be found in the Operating Instructions and the other documentation: • Internet: www.endress.com/deviceviewer •...
-
Page 4: Table Of Contents
Power supply via the external battery pack, Proline 800 - Advanced ...... -
Page 5: About This Document
Proline 800 Cellular radio About this document About this document Symbols used 1.1.1 Safety symbols DANGER This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in serious or fatal injury. WARNING This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in serious or fatal injury. - Page 6 About this document Proline 800 Cellular radio 1.1.4 Tool symbols Symbol Meaning Symbol Meaning Torx screwdriver Flat-blade screwdriver Phillips head screwdriver Allen key Open-ended wrench 1.1.5 Symbols for certain types of information Symbol Meaning Symbol Meaning Permitted Preferred Procedures, processes or actions that Procedures, processes or actions that are permitted.
-
Page 7: Safety Instructions
Proline 800 Cellular radio Safety instructions Safety instructions Requirements for the personnel The personnel must fulfill the following requirements for its tasks: ‣ Trained, qualified specialists must have a relevant qualification for this specific function and task. ‣ Are authorized by the plant owner/operator. -
Page 8: Workplace Safety
Verification for borderline cases: ‣ For special fluids and fluids for cleaning, Endress+Hauser is glad to provide assistance in verifying the corrosion resistance of fluid-wetted materials, but does not accept any warranty or liability as minute changes in the temperature, concentration or level of contamination in the process can alter the corrosion resistance properties. -
Page 9: It Security
Proline 800 Cellular radio Product description Contact address Endress+Hauser UK: Endress+Hauser Ltd. Floats Road Manchester M23 9NF United Kingdom www.uk.endress.com IT security Our warranty is valid only if the device is installed and used as described in the Operating Instructions. The device is equipped with security mechanisms to protect it against any inadvertent changes to the settings. - Page 10 Mounting Proline 800 Cellular radio 4.1.2 Mounting the transmitter of the remote version, Proline 800 - Advanced CAUTION Ambient temperature too high! Danger of electronics overheating and housing deformation. ‣ Do not exceed the permitted maximum ambient temperature . ‣...
- Page 11 TX 25 ø ( 0.79…2.75) SW 10 A0029051 2 Engineering unit mm (in) 4.1.3 Turning the transmitter housing, Proline 800 - Advanced To provide easier access to the connection compartment or display module, the transmitter housing can be turned. Endress+Hauser...
- Page 12 Mounting Proline 800 Cellular radio A0044272 Loosen the fixing screws of the housing cover (when reassembling, pay attention to the tightening torque → 15). Open the housing cover. A0044274 Open the display module. Push the ribbon cable out of the holder.
- Page 13 Proline 800 Cellular radio Mounting A0044273 Push the display module down gently at the hinge. Pull the display module out of the holder. A0043338 Disconnect the plug of the electronics module. 1 Nm (0.7 lbf ft) A0042853 Release the screws on the electronics module.
- Page 14 Mounting Proline 800 Cellular radio A0042843 10. Remove the electronics module. TX 20 A0044276 11. Loosen the fixing screws of the main electronics module (when reassembling, pay attention to the tightening torque → 15). 12. Remove the main electronics module.
- Page 15 Proline 800 Cellular radio Mounting 4 mm A0044277 13. Loosen the fixing screws of the transmitter housing (when reassembling, pay attention to the tightening torque → 15). 14. Lift the transmitter housing. 15. Turn the housing to the desired position in increments of 90°.
- Page 16 Mounting Proline 800 Cellular radio A0044279 ‣ Reverse the procedure to reassemble the measuring device. 4.1.4 Mounting the external cellular antenna If the signal is too weak, mount the external cellular antenna in a separate location. Endress+Hauser...
- Page 17 Proline 800 Cellular radio Mounting TX 15 A0044318 1 = Antenna (vertical installation, maximum torque for mounting the antenna: 15 Nm) 2 = Antenna (horizontal installation, maximum torque for mounting the antenna: 15 Nm) 3 = Grounding lug with Torx screw and washer...
- Page 18 Proline 800 Cellular radio 4.1.6 Inserting the SIM card The device is equipped with an Endress+Hauser eSIM. The device automatically recognizes an additional SIM card that has been inserted. The additionally inserted SIM card may not be protected by a PIN.
-
Page 19: Transmitter Post-Installation Check
Proline 800 Cellular radio Mounting Transmitter post-installation check The post-installation check must always be performed after the following tasks: • Mounting the transmitter housing: • Post mounting • Wall mounting • Turning the transmitter housing Is the device undamaged (visual inspection)? ... -
Page 20: Electrical Connection
Electrical connection Proline 800 Cellular radio Electrical connection NOTICE In the device versions with a mains connection (order code for "Power supply" option K or S), the device does not have an internal circuit breaker to disconnect from the power supply network. - Page 21 Proline 800 Cellular radio Electrical connection Armored connecting cable Armored connecting cables with an additional, reinforcing metal braid should be used: • When laying the cable directly in the ground • Where there is a risk of damage from rodents •...
-
Page 22: Connecting The Measuring Device
Electrical connection Proline 800 Cellular radio NOTICE Insufficient sealing of the housing! Operational reliability of the measuring device could be compromised. ‣ Use suitable cable glands corresponding to the degree of protection. Remove dummy plug if present. If the measuring device is supplied without cable glands: Provide suitable cable gland for corresponding connecting cable. - Page 23 Proline 800 Cellular radio Electrical connection 42 41 A0032103 3 Sensor: connection module Loosen the securing clamp of the housing cover. Unscrew and lift off the housing cover. NOTICE For conduit extensions: ‣ Fit O-ring on cable and push it back sufficiently. When inserting the cable, the O-ring must be located outside the conduit extension.
- Page 24 Electrical connection Proline 800 Cellular radio Attaching the connecting cable to the transmitter 6 5 7 8 4 37 36 42 41 A0044280 4 Transmitter: main electronics module with terminals Loosen the 4 fixing screws on the housing cover.
- Page 25 Proline 800 Cellular radio Electrical connection Tightening torques for plastic housing Housing cover fixing screw 1.3 Nm Cable entry 4.5 to 5 Nm Ground terminal 2.5 Nm T 20 22232021 26272425 10 (0.4) A0044281 5 Connecting the supply voltage Loosen the 4 fixing screws on the housing cover.
-
Page 26: Power Supply Via Battery Packs, Proline 800 - Advanced
Housing degree of protection may be voided due to insufficient sealing of the housing. ‣ Screw in the screw without using any lubricant. Tighten the 4 fixing screws on the housing cover. Power supply via battery packs, Proline 800 - Advanced 5.4.1 Battery pack arrangement A0043704 Battery pack 1... - Page 27 Proline 800 Cellular radio Electrical connection 5.4.2 Inserting and connecting buffer capacitors and battery packs The device is delivered either with the batteries already installed, or enclosed separately, depending on national standards and guidelines. If the batteries are inserted and connected upon delivery, to operate the device it is important to ensure that switch "B"...
- Page 28 Electrical connection Proline 800 Cellular radio 6 → 7 → A0043734 A0043735 ‣ ‣ Insert the buffer capacitor. Plug the buffer capacitor into connector 3. ‣ The device switches on. After 15 seconds, a measured value appears on the display.
-
Page 29: Connect The Cellular Antenna
Proline 800 Cellular radio Electrical connection Connect the cellular antenna If the signal is too weak, mount the external cellular antenna in a separate location. 1 → 2 → A0042838 A0044338 ‣ ‣ Open the connection Plug in the antenna connector. -
Page 30: Connecting The Pressure Sensor, Proline 800 - Advanced
A0042855 ‣ Close the connection compartment cover. Connecting the pressure sensor, Proline 800 - Advanced A0044314 Plug for the pressure sensor on the housing of the compact transmitter Plug for the pressure sensor on the housing of the remote transmitter ‣... -
Page 31: Power Supply Via The External Battery Pack, Proline 800 - Advanced
Proline 800 Cellular radio Electrical connection Power supply via the external battery pack, Proline 800 - Advanced 5.7.1 Connecting the external battery pack A0044313 Plug for the external battery pack ‣ Connect the external battery pack to the plug indicated. -
Page 32: Ensuring Potential Equalization
Electrical connection Proline 800 Cellular radio 5.7.2 Inserting batteries into the external battery pack WARNING Batteries may explode if not handled properly! ‣ Do not recharge batteries. ‣ Do not open batteries. ‣ Do not expose batteries to naked flame. - Page 33 Proline 800 Cellular radio Electrical connection 5.8.1 Connection example, standard scenario Metal, grounded pipe A0044266 6 Potential equalization via measuring tube 5.8.2 Connection example in special situations Unlined and ungrounded metal pipe This connection method also applies in situations where: •...
- Page 34 Electrical connection Proline 800 Cellular radio Connect the connection housing of the transmitter or sensor to ground potential by means of the ground terminal provided for the purpose. Proline 800 - Advanced In the case of remote device versions, the ground terminal in the example always refers to the sensor and not to the transmitter.
-
Page 35: Ensuring Potential Equalization
Proline 800 Cellular radio Electrical connection Prerequisite: The sensor is installed in the pipe in a way that provides electrical insulation. Connect the two flanges of the pipe to one another via a ground cable. Connect the flange to the ground terminal via the ground cable. - Page 36 Electrical connection Proline 800 Cellular radio PE = P A0044854 ‣ Connect the connection housing of the transmitter or sensor to ground potential via the ground terminal provided for this purpose. Metal pipe without liner • Potential equalization is via the ground terminal and pipe flanges.
- Page 37 Proline 800 Cellular radio Electrical connection Connect the connection housing of the transmitter or sensor to ground potential via the ground terminal provided for this purpose. • For DN ≤ 300 (12"): Mount the ground cable directly on the conductive flange coating of the sensor with the flange screws.
-
Page 38: Post-Connection Check
Electrical connection Proline 800 Cellular radio – ≠ P A0042253 Connect the pipe flanges and transmitter via the ground cable. Route the shielding of the signal lines via a capacitor (recommended value 1.5µF/50V). Device connected to power supply such that it is floating in relation to the protective earth (isolation transformer). -
Page 39: Operation Options
• Device software update • Heartbeat report • Parameter report The SmartBlue app is available to download free of charge for Android devices (Google Playstore) and iOS devices (iTunes Apple Store): Endress+Hauser SmartBlue Directly to the app with the QR code: Endress+Hauser... -
Page 40: System Integration
• The device appears immediately in the live list if the local display is touched for 5 seconds. • The device with the highest signal strength appears at the very top of the live list. Forgotten your password: contact Endress+Hauser Service. System integration For detailed information on system integration, see the Operating Instructions for the device →... -
Page 41: Configuring The Measuring Device
Proline 800 Cellular radio Commissioning 8.2.2 Connect the SmartBlue App to the device Log in Configuring the measuring device Complete this wizard to commission the device. For each parameter, enter the appropriate value or select the appropriate option. NOTE If you exit the wizard before completing all required parameters, the changes you made will be saved. - Page 42 Commissioning Proline 800 Cellular radio 8.4.2 Write protection via write protection switch Off A0047361 ‣ Information regarding the write protection switch is provided on the connection nameplate in the connection compartment cover. Unlike parameter write protection via a user-specific access code, this allows write access to the entire operating menu to be locked.
-
Page 43: Diagnostic Information
Proline 800 Cellular radio Diagnostic information Diagnostic information Faults detected by the self-monitoring system of the measuring device are displayed as a diagnostic message in alternation with the operational display. The message about remedial measures can be called up from the diagnostic message, and contains important information on the fault. - Page 44 *71552846* 71552846 www.addresses.endress.com...