Section 3 Dial Pointer Setting - Sony ICF-R40 Service Manual

Note: Follow the assembly procedure in the numerical order given.
4 knob (tune)
3 gear
(midway)
8 Rotate the gear
(tuning capacitor) fully
in the direction of the arrow C .
SECTION 3
DIAL POINTER SETTING
A
9 MAIN board
Note: On installation of MAIN board,
set the outline of gear
(tuning capacitor).
C
1 Insert the pointer in the groove of
cabinet (front) assy and slide
in the direction of the arrow A .
pointer
marking
cabinet (front) assy
7 screw
(1.7 × 3)
boss
oval
cabinet (front) assy
– 5 –
2 Set the tip of pointer to the marking
of cabinet (front) assy.
the tip of pointer
cabinet (front) assy
6 To install the gear
fixing each oval shape,
set the boss of the gear
(tuning capacitor) as the figure.
5 Rotate the tuning capacitor
shaft fully in the direction of
the arrow B .
B