Stealth Cam STC-GMAX32V Instruction Manual page 15

SECURITY KEY: This setting allows the owner
of the camera to program a four (4) character
alphanumeric code toprevent unauthorized access
to their camera settings.Default code is 0000.
NOTE: The camera owner is responsible for
remembering the code. Should the code be
forgotten the owner must call in to Customer
Service (877-269-8490) for directions on getting
the unit restored to factory defaults. In order for the
owner to be authorized for the reset, this camera
must be registered with Stealth Cam.
FACTORY RESET: This option will reset the
camera to its factory defaults. This will erase any
CUSTOM camera setup present.
OPTIONS: Yes | No
FORMAT CARD: This setting is used to format
the SD memory card installed. Formatting your SD
card will ERASE ALL DATA PRESENT. To format
card, change setting to Yes and press Enter.
NOTE: After card is formatted it is impossible to
restore data that was present on card.
LANGUAGE: This feature allows you to select
display language for the menu.
SW UPGRADE: This option will allow you to
update your camera software if update files are
present on SD card. If files are not present, setting
simply shows current software version.
OPTIONS: Yes | No
Page 15