Customizing Your Ique 3600A; Changing The Measurement Units; Adjusting The Backlight And Led Brightness; Setting The Date And Time - Garmin iQue 3600a Application Manual

C Q A
USTOMIZING THE UE PPLICATIONS

Customizing Your iQue 3600a

You may want to change the way units of measure
and the time and date are displayed.

Changing the Measurement Units

If you live outside the United States, you may want to
change the measurement units to Metric.
To customize the Units setting:
1. Open Que Preferences.
2. Tap the on the left under the Preferences
menu bar and tap Units from the list.
3. Select the desired units for each
measurement.
Adjusting the Backlight and LED
Brightness
Tap the Brightness icon
adjustment slider for the backlighting and power
LED. When connected to external power, the power
LED has two brightness settings: Bright and dim.
Move the slider to the Left to lower the brightness and
to the Right to raise it.
80
> C Y
USTOMIZING OUR I
to open the brightness
Q 3600
UE A

Setting the Date and Time

If you are receiving satellite signals, your date and
time will be set automatically. You may need to adjust
the time zone and enable Daylight Saving Time.
To set the date and time:
1. From the Applications Launcher screen, tap
the Prefs icon
2. Tap the pick list in the upper right corner
and tap Date & Time.
3. Select the proper date from the calendar.
4. Select your time zone, and then enter the
proper date and time. Enable or disable
Daylight Saving.
.
iQue 3600a Que Applications Guide