Garmin StreetPilot III Owner's Manual & Reference page 37

To add a Via Point:
1. Press the ROUTE key to view the Routes menu. Select 'Via Point' and press ENTER, then, select
'Add Via Point' and press ENTER again (note that if the active route does not contain any via points,
the 'Add Via Point' option will be the only allowable option). A window appears with two selectable
options ('Use Map' and 'Find').
2. To choose a via point using the map, select 'Use Map', point to a location on the map and press
ENTER. The route will be recalculated to include the newly entered via point.
3. To choose an already stored location to become a via point, select 'Find' and follow the directions on
page 27 to select a location, then, click 'OK'. The route will automatically be recalculated to include
the newly added via point.
NOTE: a via point is always placed after all of the via points already entered. Thus, the
newly entered via point becomes the last point on the route before destination.
To remove a Via Point:
1. Press the ROUTE key to view the Routes menu. Select 'Via Point' and press ENTER, then, select
'Remove Via Point' and press ENTER again (note that if the active route does not contain any via
points, the 'Remove Via Point' option will automatically be disabled).
2. A window appears, asking you to confi rm your intention to remove the via point from the current
route. Pressing 'Yes' will automatically remove the last via point entered and allow the route to be
recalculated to refl ect the change.
Reference
Using the Routes Menu
You can add a via point using either the map ('Use Map')
or the 'Find' option in order to add an intermediary
location to your route.
You can also remove the last via point entered, using the
'Remove Via Point' option under the 'Via Point' feature
of the Routes menu.
35