Sending A Location - Garmin Rino 110 Owner's Manual

Sending a Location

Another handy feature is the ability to send a specific
location to other Rino users. This comes in handy when
you are trying to round up the group or you want to meet
at a specific location. You may send any point found from
the Find 'N Go menu. If the unit needs to wait until 30
seconds have elapsed since the last position transmission,
a "Waiting to send location..." message appears until the
unit is able to transmit. If a location is sent more than
once, a number is automatically added to the end of the
name, such as CAMP, CAMP 1, and CAMP 2.
To send a location:
1. Press the Thumb Stick In and hold it until the
Shortcuts Menu is displayed.
2. Highlight Find 'N' Go and press the Thumb
Stick In.
3. Highlight the desired category and press the
Thumb Stick In. (For the Contacts List, select the
desired contact and press the Thumb Stick In.)
Rino 110 Owner's Manual
®
U O > U
NIT PERATION SING THE
4. Depending on which category you select, highlight
the desired item and press the Thumb Stick In to
display the Information Page for that item.
5. From the Information Page, highlight the Option
Menu in the upper right and press the Thumb
Stick In.
6. Highlight Send Location and press In again. The
unit now sends the point to the other Rino users
on your channel/squelch code.
Choose Send Location and press In.
R 110 R F
INO ADIO EATURES
21