Installation Diagrams - Motorola DCT5100 Quick Start Manual

Installation Diagrams

Connecting the high-definition digital receiver to
an HDTV using the included cables
This is a common configuration for HDTV's which uses the component
cables provided by your Charter Business Quick-Start Install kit.
What you will need:
1 COAX cable 1 RCA cable
IR
TO
TV/VCR
CABLE
IN USB
1
Connects to wall
3
Video 1 Video 2 Video 3
DVI IN R
Y
L S-Video
Pb
Video
Pr
Cable/
R R R
Antenna IN
Audio
L L L
STEP ONE: Connect the coax cable between the cable wall outlet and
the CABLE IN port on the high-definition digital receiver.
STEP TWO: Locate the Y, Pb, Pr inputs on the HDTV and the Y, Pb, Pr
outputs on the high-definition digital receiver. (Y=green, Pb-blue, Pr-red).
Connect the provided component cable (red, blue green) to the Y, Pb, Pr
OUT ports on the high-definition digital receiver and the corresponding
IN ports on the HDTV.
STEP THREE: Connect the RCA cables between the DIGITAL AUDIO OUT
R (red)/DIGITAL AUDIO OUT L (white) ports on the high-definition digital
receiver with the AUDIO IN R (red)/AUDIO IN L (white) ports on the HDTV.
STEP FOUR: Plug in and turn on your devices. Select the input source on
your HDTV that you used. See page 9 to program your picture settings.
4 charter-business.com
1 Y, Pb, Pr
component
cable
AUDIO IN VIDEO
R L SPDIF IN OUT
IEEE 1394
SWITCHED
S-VIDEO
105/125V
TV
60Hz
Pass Card
R L Y Pb Pr
4A MAX
AUDIO 500W MAX
OPTICAL
OUT
SPDIF
2
HDTV
Note: The exact location of
the ports on your digital
receiver may vary.
Connecting the high-definition digital receiver to
an HDTV using a DVI cable
This is the configuration you will use if you already have a DVI connector for
your HDTV.
What you will need:
1 COAX cable
TO
TV/VCR
CONVENIENCE
OUTLET
Connects to wall
DVI IN R
L
Cable/
Antenna IN
STEP ONE: Connect the coax cable between the cable wall outlet and
the CABLE IN port on the high-definition digital receiver.
STEP TWO: Connect the DVI cable between the DVI port on the HD
Receiver and the DVI/HDCP IN port on the HDTV.
STEP THREE: Connect the RCA cables between the DIGITAL AUDIO
OUT R (red) / DIGITAL AUDIO OUT L (white) ports on the high definition
digital receiver with the AUDIO IN R (red)/AUDIO IN L (white) ports
on the HDTV.
STEP FOUR: Plug in and turn on your devices. Select the DVI input
source on your HDTV. See page 9 to program your picture settings.
1 RCA cable
AUDIO IN VIDEO
R L SPDIF IN OUT
IR
R L Pass Card
Y Pb Pr
CABLE
AUDIO
USB
IN OUT
1 2
3
HDTV
Note: The exact location of
Video 1 Video 2 Video 3
Y
S-Video
Pb
Video
Pr
R R R
Audio
L L L
Installation Diagrams
(DVI cable sold separately)
DVI
1 DVI cable
CABLE
SOLD
SEPARATELY
IEEE 1394
SWITCHED
S-VIDEO
105/125V
TV
60Hz
4A MAX
CONVENIENCE
500W MAX
OPTICAL
OUTLET
SPDIF
the ports on your digital
receiver may vary.
Charter Business Self-Install Guide 5