Table of Contents
Advertisement
[ 6615LG ]
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
[9] IR Sensor
CBA
[1] Rear Cabinet
[8] Speaker (s)
[3] Jack Holder
[4] Main CBA
[5] Tilt Stand
Holder
[6] LCD Module
[7] Function CBA
[10] Front Cabinet
2. Disassembly Method
Step/
Loc.
Part
Fig.
No.
No.
Rear
[1]
D1 10(S-1), (S-2)
Cabinet
Tilt Stand
[2]
D1 2(S-3)
Assembly
[3]
Jack Holder D2 3(S-4), (S-5)
6(S-6), *CN401,
*CN403, *CN801,
D2
[4]
Main CBA
*CN802, *CN1201,
D4
*CN1202, *CN1205,
*CN1206, *CN1207
Tilt Stand
[5]
D2 2(S-7)
Holder
LCD
[6]
D2 5(S-8)
Module
Function
[7]
D2 3(S-9)
CBA
[2] Tilt Stand
Assembly
[11] Stand Cover
[12] Arm Holder
[13] Sheet L, R
[14] Arm
Assembly
Removal
Remove/*Unhook/
Unlock/Release/
Note
Unplug/Unclamp/
Desolder
---
---
---
---
---
---
---
Step/
Loc.
Part
Fig.
No.
No.
[8]
Speaker (s) D2
IR Sensor
[9]
D2 (S-11)
CBA
Front
[10]
D2 ---------------
Cabinet
Stand
[11]
D3 6(S-12)
Cover
[12] Arm Holder D3 2(S-13)
[13] Sheet L, R
D3 ---------------
Arm
[14]
D3 ---------------
Assembly
↓
↓
↓
(1)
(2)
(3)
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to the following "Reference Notes in the
Table."
4-4
Removal
Remove/*Unhook/
Unlock/Release/
Note
Unplug/Unclamp/
Desolder
4(S-10), Speaker
Holder (s)
↓
(4)
(5)
L2500_01DC
---
---
---
---
---
---
---
↓
Advertisement
Table of Contents
