Advertisement
NOTICE
To avoid the possibility of malfunction/damage
to the product or damage to other property,
follow the notices below.
Handling and maintenance
• Do not use the product in the vicinity of a TV,
radio, or other electric products. Otherwise,
the product, TV, or radio may generate
noise.
• Do not expose the product to excessive
dust or vibration, or extreme cold or heat, in
order to prevent the possibility of panel
disfiguration, unstable operation, or
damage to the internal components.
• Do not install in locations where temperature
changes are severe. Otherwise,
condensation may form on the inside or the
surface of the product, causing it to break.
• If there is reason to believe that
condensation might have occurred, leave
the product for several hours without turning
on the power until the condensation has
completely dried out, in order to prevent
possible damage.
• When cleaning the product, use a dry and
soft cloth. Do not use paint thinners,
solvents, cleaning fluids, or chemical-
impregnated wiping cloths, since this might
cause alteration or discoloration.
Information
About functions bundled with
the product
• Even when the [P] (Standby/On) switch is
in standby status (power lamp is off),
electricity is still flowing to the product at the
minimum level. When you are not using the
product for a long time, make sure you
unplug the power cord from the wall AC
outlet.
• XLR-type connectors are wired as follows
(IEC60268 standard): pin 1: ground, pin 2:
hot (+), and pin 3: cold (-).
About this manual
• The illustrations as shown in this manual are
for instructional purposes only.
• The company names and product names in
this manual are the trademarks or registered
trademarks of their respective companies.
About disposal
• This product contains recyclable
components. When disposing of this
product, please contact the appropriate
local authorities.
Yamaha cannot be held responsible for
damage caused by improper use or
modifications to the product.
MS101-4 Owner's Manual
5
Advertisement
