Dimensions — Unit 38Ah104 - Carrier 38AH044-084 Installation, Start-Up And Service Instructions Manual

Chart 1, Field Power Supply Connections
UNIT
VOLTAGE Hz DIAMETER — in. (mm)
38AH
208/230 60
460, 575,
104 60
380
346, 380/415 50
QUANTITY
3 5 ⁄ (92) 2
8
3 5 ⁄ (92) 1
8
3 5 ⁄ (92) 1
8
Fig. 4 — Dimensions — Unit 38AH104
LEGEND
C — Copper Fin Coils
MTG — Mounting
SAE — Society of Automotive Engineers
NOTES:
1. The approximate operating weight of the unit is:
38AH-104--- 5435 lb (2465 kg)
38AH-104--C 6160 lb (2794 kg)
2. Unit must have clearances for airflow as follows:
Top — Do not restrict in any way.
Ends — 5 ft [1524 mm]
Sides — 6 ft [1829 mm]
3. Mounting holes may be used to mount unit to concrete pad. They are not
recommended for mounting unit to spring isolators.
4. Two 3 ⁄ (92-mm) dia holes are recommended for parallel conductors on
5
8
208/230 v units.
5. Circled numerals in Top View refer to condenser fans by position.
6. If spring isolators are used, a perimeter support channel between the unit
and the isolators is recommended.
7. See Table 1 for rigging center of gravity (Dimensions X,Y). See Table 2A
and 2B for A-D corner weights.
7