Dimensions — Units 38Ah044,054,064 - Carrier 38AH044-084 Installation, Start-Up And Service Instructions Manual

DUAL CKT
SUCTION
2 ⁄ Dia [54 mm]
1
8
CONNECTION(S)
LIQUID
7 ⁄ Dia [22 mm]
8
CONNECTION(S)
SUCTION C 2 - 11 ⁄ [627mm]
16
LIQUID D 1 -10 1 ⁄ [561mm]
16
SUCTION (Ckt A) 1 -7 13 ⁄ [503mm]
16
SUCTION (Ckt B) 2 - 5 ⁄ [626mm]
8
LIQUID (Ckt A) 2 -5 3 ⁄ [756mm]
4
LIQUID (Ckt B) 2 -10 5 ⁄ [879mm]
8
Chart 1, Field Power Supply Connections
UNIT VOLTAGE Hz DIAMETER — in. [mm]
044 230 50
208/230 60
044, 054
346, 380/415 50
044, 054, 064 460,575,380 60
208/230 60
064
346, 380/415 50
LEGEND
C — Copper Fin Coils
MTG — Mounting
SAE — Society of Automotive Engineers
NOTES:
1. The approximate operating weight of the unit is:
38AH-044--- 3259 lb [1478 kg]
38AH-044--C 3547 lb [1609 kg]
38AH-054--- 3309 lb [1501 kg]
38AH-054--C 3597 lb [1632 kg]
38AH-064--- 3565 lb [1617 kg]
38AH-064--C 3998 lb [1813 kg]
2. Unit must have clearances for airflow as follows:
Top — Do not restrict in any way.
Ends — 5 ft [1524 mm]
Sides — 6 ft [1829 mm]
3. Mounting holes may be used to mount unit to concrete pad. They are not recommended for mounting
unit to spring isolators. If spring isolators are used, a perimeter support channel between the unit and
the isolators is recommended.
4. One 3 5 ⁄ (92 mm) diameter hole is recommended for single-entry power on size 064 (208/230-v) units.
8
5. See Table 1 for rigging center of gravity (Dimensions X,Y). See Table 2A and 2B for A-D corner weights.
6. Circled numerals in Top View refer to condenser fans by position.
SINGLE CKT
2 ⁄ Dia [67 mm]
5
8
1 1 ⁄ Dia [29 mm]
8
1 -10 5 ⁄ [567mm]
16
1 -10 5 ⁄ [567mm]
16
2 - 5 ⁄ [626mm]
8
—
2 -10 5 ⁄ [879mm]
8
—
QTY
3 5 ⁄ [92] 1
8
3 5 ⁄ [92] 1
8
2 1 ⁄ [63] 1
2
2 1 ⁄ [63] 1
2
2 1 ⁄ [63] 2
2
3 5 ⁄ [92] 1
8
Fig. 1 — Dimensions — Units 38AH044,054,064
4