Garmin GPSMAP 4008 Installation Instructions Manual page 19

Marine Video Cable
The included Marine Video 17-pin cable allows input of NTSC (National Television System Committee)/PAL (Phase Alternate Line) composite
video sources, and PC monitor output (4008/4208/4010/4210/5008/5208 = VGA output, 4012/4212/5012/5212/5015/5215 = XGA output).
Marine Video inputs are only available on the chartplotter to which they are attached and will not transmit over the Garmin Marine Network.
➊ and ➋ VIDEO 1 and VIDEO 2 Inputs (RCA connectors) allow input from two separate NTSC/PAL compatible video devices, such as VCR,
DVD, TV, or a video camera. The chartplotter can display one video input at a time or alternate between the two. See the owner's manual for
details. Sound from a video source must be attached to a separate stereo/audio system. The video output from video device attaches to the
Video 1 (Black Cable) or Video 2 (Gray Cable) RCA connectors.
➌ Use the PC monitor output (HD 15-pin) connector for remote viewing of the chartplotter display on a computer monitor. The remote monitor
must be capable of at least VGA resolution and have multi-sync capability.
➌ ➌
➋ ➋
➊ ➊
GPSMAP 4000/5000 Series Installation Instructions
PIN 1 PIN 1
PIN 2 PIN 2
PIN 17 PIN 17
Marine Video Cable Marine Video Cable
end View end View
Note Connector
rCA-1
➊
CeNTer
rCA-1 OUTer
rCA-2
➋
CeNTer
rCA-2 OUTer
HD-15 PIN 1
➌
HD-15 PIN 2
HD-15 PIN 3
PIN 7 PIN 7
HD-15 PIN 5
HD-15 PIN 6
HD-15 PIN 7
HD-15 PIN 8
HD-15 PIN 10
HD-15 PIN 13
HD-15 PIN 14
HD-15 PIN
SHell
Pin Function
2 VIDeO 1 IN (BlACk jACkeT)
6 VIDeO 1 IN, GND
11 VIDeO 2 IN (GrAy jACkeT)
15 VIDeO 2 IN, GND
1 VGA, ANAlOG-reD
4 VGA, ANAlOG-GreeN
3 VGA, ANAlOG-BlUe
13 VGA, ANAlOG, GND
8 VGA, ANAlOG-reD, GND
8 VGA, ANAlOG-GreeN, GND
8 VGA, ANAlOG-BlUe, GND
13 VGA, SyNC-GND
7 VGA, H-SyNC
12 VGA, V-SyNC
9 VGA, OVerAll SHIelD
1