Enabling High Resolution Satellite Imagery - Garmin GPSMAP 4008 Owner's Manual

u c
SInG hartS

Enabling High Resolution Satellite Imagery

You can overlay high-resolution satellite images on the land, sea, or both portions of the Navigation
chart when using a preprogrammed BlueChart g2 Vision SD card.
To enable satellite imagery:
1. While viewing the Navigation
2. Select Chart Setup > Appearance > Photos.
3. Select one of the following:
• Off—standard chart information is shown on the map.
• Land Only—standard chart information is shown on water with photos overlaying the land.
• Blend—photos overlay both the water and the land at a specified opacity. The higher you
set the percentage, the more the satellite photos will cover both land and water.
NOtE: When enabled, the high resolution satellite images are only present at lower zoom levels.
If you cannot see the high resolution images in your BlueChart g2 Vision region, either zoom in
further using the
(GPSMAP 5008/5012), or set the detail level higher.
Photo Overlay Off
Blend at 50%
4
Chart, press MENU.
RANGE (+)
key (GPSMAP 4008/4012) or touch the key
Land Only Photo Overlay
Blend at 100%
GPSMAP 4000/5000 Series Owner's Manual
®