Rear Side - Asus V1Jp Hardware User Manual

2
Knowing the Parts
Power Station (optional)

Rear Side

PS/2 Port
1
The PS/2 port is for connection to either an external PS/2 mouse or an external
PS/2 keyboard.
USB Port (2.0/1.1)
2
2.0
The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as
keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a
series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices
to run simultaneously on a single computer, with some peripherals acting as additional plug-in
sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected
or disconnected without restarting the computer.
Power (DC) Input (Power Station)
3
The supplied power adapter converts AC power to DC power for use with
this jack. Power supplied through this jack supplies power to the power
station, Notebook PC, and charges the Notebook PC's battery pack. To
prevent damage to the power station, Notebook PC, and battery pack,
always use the supplied power adapter. CAUTION: MAY BECOME WARM TO HOT WHEN IN USE.
BE SURE NOT TO COVER THE ADAPTER AND KEEP IT AWAY FROM YOUR BODY.
LAN Port
4
The RJ-45 LAN port with eight pins is larger than the RJ-11 modem port and
supports a standard Ethernet cable for connection to a local network. The built-in
connector allows convenient use without additional adapters.
Serial Port
5
The 9-pin D-sub serial port supports native serial devices such as a serial drawing
tablets, serial mouse, or serial modem. Serial devices have been slowly replaced by
USB devices.
24
1 2 3
4
5
6
7

The power station has
its own power adapter.